AUDISON BIT ONE HD 13 CHANNELS HIGH RESOLUTION CAR DIGITAL SIGNAL PROCESSOR NEW

Description

Brand New!
Bit One HD  - Audison Bit One HD 13 Channels Hi-Resolution Digital Signal Processor
Retail Price:
,999.99
Features & Specifications:
Audio DSP and converters
Analog Devices DSP (ADSP-21489), 32 bit floating-point Sharc series (450 MHz clock). Cirrus Logic (CS5368 8ch and CS4365 6ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance
Inputs
Inputs 12 independent high-level channels (signal-summing) or 6 independent analog low-level channels
2 analog low-level stereo auxiliary inputs
2 optical digital inputs (TOSLINK)
Memory
8 Preset separately managed and recalled from the DRC MP
Outputs
13 IIR or 9 FIR independent low-level analog channels and 2 AD Link outputs. 13 IIR or 9 FIR independent digital audio channels to be connected through two CAT 5.S LAN cables for use with AD Link provided amplifiers
Turn on Controls
ART™, Automatic Remote turn On/Off for high level inputs through the DRC MP
Configuration
Guided procedure for the calibration and “signal routing” of the input channels to the output channels based on type and number of inputs, loudspeakers and amplifiers, for the system setup to be developed
Signal summing, De-Equalization and Delay compensation
Automatic algorithms dedicated to the reconstruction of a stereo signal from a multi-channel signal and to fine-tune the signal in advanced OEM systems: time delay compensation (De-Ta); sum of multi-amplified and limited bandwidth signals; signal de-equalization (De-Eq)
In/Out Volume
Input sensitivity automatically adjusted for the main inputs (Wizard with CD and DVD Test)
Manual input sensitivity adjustment for auxiliary inputs (SW)
Independent level control for each output channel for system fine-tuning (-40 ÷ 0 dB)
Dynamic Equalizer
Automatic system for the dynamic equalization between low and high listening levels, to be selected by the user via DRC MP
Equalizers
Four 5-poles parametric FIR type equalizers, one for each source
Thirteen 11-poles IIR equalizers / Nine 5-poles FIR equalizers (alternative FIR firmware), one for each output channel
5-poles parametric FIR type main equalizer
Bass Boost
Low frequencies enhancement based on parametric equalizer, bound to the Woofer and Sub sections, to be set up by the user and selectable via DRC MP
Crossover filter
Filter type: Hi-Pass, Lo-Pass, Band-Pass, Full Range
Cut-off frequency: 70 steps available from 10 ÷ 20 kHz
Cut-off slope: 6 ÷ 48 dB Oct.; Bessel 6 ÷ 36 dB Oct.
Alignments: Linkwitz, Butterworth, Bessel, FIR mode (alternative firmware version)
Mute/Solo: for each output (On/Off)
Phase: for each output (0°/180°)
Time alignment
Procedure to set up the time delays on the real distances between the loudspeakers and the listening point (0÷22 ms max). The system also provides for a manual fine-tuning in steps of 0.01 ms
Auto restart
Auto restart in case of DSP fault
DRC MP
Control: Master Volume (-60 ÷ 0 dB), Subwoofer Volume (MUTE, - 11,5 ÷ 0 dB), Balance, Fader; Inputs selection; Management of the pre-sets stored; Bass Boost function turn on/off
PC Connection
1 micro USB connector (1.1/2.0/ 3.0 compatible) to connect to the PC
bit One HD software
Windows-based software (32/64 bit): Windows XP, Vista, 7, 8, 8.1, 10 available in “Standard” or “Expert” mode
Minimum resolution: 800 x 600
International Shipping:
Free shipping DOES NOT APPLY to Puerto Rico, Hawaii, Guam, Alaska or any country outside of the United States.
Please
message us
for shipping quotes.
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
Warranty
:
Each and every product for sale on ebay.com by woofersetc is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#.
In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product.
Protect Your Product With a Consumer Priority Service Warranty